Anti-abrasion Masterbatch NM-3C Make rubber outsole comfort and more wear resistance,
Anti-abrasion Masterbatch NM-3C, improve outsoles’ abrasion resistance, improving the color, processing performance, surface glossiness is improved, the flowability of resin, wear resistance rubber outsole,
Anti-abrasion masterbatch NM-3C is a pelletized formulation with 50% active ingredient dispersed in rubber . It’s particularly developed for rubber shoe’s sole compounds, helps to improving the final items abrasion resistance and decrease the abrasion value in the thermoplastics .
Compare to conventional lower molecular weight Silicone / Siloxane additives,like Silicone oil, silicone fluids or other type abrasion additives, SILIKE Anti-abrasion Masterbatch NM-3C is expected to give a much better abrasion resistance property without any influence on hardness and color.
Grade |
NM-3C |
Appearance |
White pellet |
active ingredients content % |
50 |
Carrier |
rubber |
Melt index ( 190℃, 10.00KG ) g/10min |
5.10 ( typical value ) |
Dosage % (w/w) |
0.5~5% |
(1) Improved abrasion resistance with decreased abrasion value
(2) Impart the processing performance and final items appearance
(3) Eco-friendly
(4) No influence on hardness and color
(5) Effective for DIN, ASTM, NBS , AKRON, SATRA, GB abrasion tests
…..
Applicable for NR, NBR, EPDM, CR, BR, SBR, IR, HR, CSM, etc.
Basic formula |
NR/NBR | 40 |
+NM-3C |
0 |
2% |
4% |
6% |
Engine oil | 5 |
DIN value |
170 |
139 |
129 |
117 |
|
CB | 50 |
Mix NM-3C with rubber into internal mixer during the temperature rising mixture process, to evenly mix. The output temperature should be above 100 ℃. NM-3C is recommend to be used with Si-69.
When added to rubber at 0.2 to 1% , improved processing and flow of the resin is expected, including better mold filling, less extruder torque, internal lubricants, mold release and faster throughput; At a higher addition level , 2~10%, improved surface properties are expected, including lubricity , slip, lower coefficient of friction and greater mar/scratch and abrasion resistance
25Kg / bag , craft paper bag
Transport as non-hazardous chemical. Store in a cool , well ventilated place .
Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.
Chengdu Silike Technology Co., Ltd is a manufacturer and supplier of silicone material, who has dedicated to R&D of the combination of Silicone with thermoplastics for 20+ years, products including but not limited to Silicone masterbatch , Silicone powder, Anti-scratch masterbatch, Super-slip Masterbatch, Anti-abrasion masterbatch, Anti-Squeaking masterbatch, Silicone wax and Silicone-Thermoplastic Vulcanizate(Si-TPV), for more details and test data, please feel free to contact Ms.Amy Wang Email: amy.wang@silike.cnWith consumers becoming more active in their daily lives of all kinds of sports, the requirements for comfortable, and slip- and abrasion-resistant footwear has become increasingly higher. Rubber has been applied gradually in the field of sports equipment, especially in the design of sports shoes, such as running shoes, boxing shoes, and wrestling shoes, because of its favorable performance.
The addition of SILIKE Anti-abrasion Masterbatch NM-3C into rubber (BR, SBR, NBR, EPDM, CR, IR, HR, CSM, NR) while manufacturing the sole of the footwear, could greatly improve the abrasion resistance of the sole, and reduce wear value.
The exercise test showed that the shoes could effectively reduce plantar pressure, generation of local pain could be avoided, and enhance comfort.
$0
grades Silicone Masterbatch
grades Silicone Powder
grades Anti-scratch Masterbatch
grades Anti-abrasion Masterbatch
grades Si-TPV
grades Silicone Wax