China Manufacturers Suppliers Slip Additive Masterbatch for TPU film and EVA film,
and non-migration., good stability, no precipitation, no stickiness at high temperatures, Slip Additive Masterbatch for TPU film and EVA film,
SILIKE Super slip Anti-blocking masterbatch SF series is specially developed for Plastic film products . Using specially modified silicone polymer as the active ingredient, it overcomes the key defects of general slip agents, including the continuous precipitation of the smooth agent from the surface of the film, the smooth performance decreasing with time-going by and the rise of temperature with unpleasant odors etc. SF Masterbatch is suitable for TPU, EVA blow, casting film. The processing performance is the same as the substrate, no need to change the processing conditions. It is widely used in the production of TPU, EVA blowing film, casting film and extrusion coating.
Grade |
SF102 |
SF109 |
Appearance |
Off-white pellet |
Off-white pellet |
Effective content(%) |
35 |
35 |
Resin base |
EVA |
TPU |
Volatiles(%) |
<0.5 |
<0.5 |
Melt index (℃) (190℃,2.16kg)(g/10min) |
4~8 |
9~13 |
Melt index (℃) of resin base (190℃,2.16kg)(g/10min) |
2-4 |
5-9 |
Density(g/cm3) |
1.1 |
1.3 |
1. By adding SF products in the production of TPU and EVA films, it can effectively reduce the coefficient of dynamic and static friction, improve the processing performance (high fluidity, low energy consumption, elimination of bubbles, etc.), have multiple functions such as smooth, open, anti-adhesion .
2. With specially modified silicone polymer as the active ingredient, there is no precipitation, no stickiness at high temperature, good stability and non-migration.
3. Improving the adhesion resistance of the film on the high-speed packing line, without affecting the processing, printing and heat sealing properties of the film.
4. SF Masterbatch is easy to disperse in the resin matrix, and could effectively improve the film quality.
1. SF Masterbatch is suitable for blow molding, casting molding. The processing performance is the same as the substrate, no need to change the processing conditions. Recommend addition is generally 6 ~ 10%, and could make appropriate adjustments according to the product characteristics of raw materials and the thickness of the production of the film. SF Masterbatch is directly added to the substrate particles, mixed evenly and then added to the extruder.
2. SF Masterbatch can be used with little or no anti-blocking agent.
3. For better result , pre-drying is recommended
25Kg / bag , craft paper bag
Transport as non-hazardous chemical. Store in a cool , well ventilated place .
Transport as non-hazardous chemical. Store in a cool , well ventilated place .
Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.Slip additive masterbatch is easy to disperse in the resin matrix, and could effectively improve the film quality.
By adding slip additive masterbatch in the production of TPU and EVA films, it can effectively reduce the coefficient of dynamic and static friction, improve the processing performance (high fluidity, low energy consumption, elimination of bubbles, etc.), and have multiple functions such as smooth, open, anti-adhesion.With specially modified silicone polymer as the active ingredient, there is no precipitation, no stickiness at high temperatures, good stability, and non-migration.
$0
grades Silicone Masterbatch
grades Silicone Powder
grades Anti-scratch Masterbatch
grades Anti-abrasion Masterbatch
grades Si-TPV
grades Silicone Wax