China China Wholesale PA6 based silicone masterbatch Factory – ANTI-WEAR AGENT NM-3C – Silike Manufacture and Factory

China Wholesale PA6 based silicone masterbatch Factory – ANTI-WEAR AGENT NM-3C – Silike

Product Detail

Product Tags

Sample service

Feedback (2)

The shopper satisfaction is our primary focus on. We uphold a consistent level of professionalism, quality, credibility and repair for Compound Plastic, Tpv For Wire And Cable, Cable Material Tpv Rubber Granule, Please sense no cost to speak to us anytime. We are going to reply you when we receive your inquiries. Remember to note that samples are available before we start our business enterprise.

China Wholesale PA6 based silicone masterbatch Factory – ANTI-WEAR AGENT NM-3C – Silike Detail:

Anti-abrasion masterbatch NM-3C is a pelletized formulation with 50% active ingredient dispersed in rubber . It’s particularly developed for rubber shoe’s sole compounds, helps to improving the final items abrasion resistance and decrease the abrasion value in the thermoplastics .

Compare to conventional lower molecular weight Silicone / Siloxane additives,like Silicone oil, silicone fluids or other type abrasion additives, SILIKE Anti-abrasion Masterbatch NM-3C is expected to give a much better abrasion resistance property without any influence on hardness and color.

Grade	NM-3C
Appearance	White pellet
active ingredients content %	50
Carrier	rubber
Melt index ( 190℃, 10.00KG ) g/10min	5.10 ( typical value )
Dosage % (w/w)	0.5～5%

(1) Improved abrasion resistance with decreased abrasion value

(2) Impart the processing performance and final items appearance

(3) Eco-friendly

(4) No influence on hardness and color

(5) Effective for DIN, ASTM, NBS , AKRON, SATRA, GB abrasion tests
…..

Applicable for NR, NBR, EPDM, CR, BR, SBR, IR, HR, CSM, etc.

Basic formula	NR/NBR	40	+NM-3C	0	2%	4%	6%
	Engine oil	5	DIN value	170	139	129	117
	CB	50

Mix NM-3C with rubber into internal mixer during the temperature rising mixture process, to evenly mix. The output temperature should be above 100 ℃. NM-3C is recommend to be used with Si-69.

When added to rubber at 0.2 to 1% , improved processing and flow of the resin is expected, including better mold filling, less extruder torque, internal lubricants, mold release and faster throughput; At a higher addition level , 2~10%, improved surface properties are expected, including lubricity , slip, lower coefficient of friction and greater mar/scratch and abrasion resistance

25Kg / bag , craft paper bag

Transport as non-hazardous chemical. Store in a cool , well ventilated place .

Original characteristics remain intact for 24 months from the production date , if kept in recommend storage.

Chengdu Silike Technology Co., Ltd is a manufacturer and supplier of silicone material, who has dedicated to R&D of the combination of Silicone with thermoplastics for 20⁺ years, products including but not limited to Silicone masterbatch , Silicone powder, Anti-scratch masterbatch, Super-slip Masterbatch, Anti-abrasion masterbatch, Anti-Squeaking masterbatch, Silicone wax and Silicone-Thermoplastic Vulcanizate(Si-TPV), for more details and test data, please feel free to contact Ms.Amy Wang Email: amy.wang@silike.cn

Product detail pictures:

FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES

Sample type

50+
grades Silicone Masterbatch
10+
grades Silicone Powder
10+
grades Anti-scratch Masterbatch
10+
grades Anti-abrasion Masterbatch
10+
grades Si-TPV
8+
grades Silicone Wax

Speaking of this cooperation with the Chinese manufacturer, I just want to say"well dodne", we are very satisfied.

By Jonathan from Lahore - 2018.12.30 10:21

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Edith from Amman - 2018.11.11 19:52

Write your message here and send it to us