High-temperature Permanent slip additive solutions for films,
films, Permanent slip additive solution, Silicone Wax, slip additive,
SILIMER 5062 is long chain alkyl-modified siloxane masterbatch containing polar functional groups. It is mainly used in PE, PP and other polyolefin films, can significantly improve anti-blocking & smoothness of the film, and the lubrication during processing, can greatly reduce the film surface dynamic and static friction coefficient, make the film surface more smooth. At the same time, SILIMER 5062 has a special structure with good compatibility with the matrix resin, no precipitation, no effect on the transparency of film.
Grade | SILIMER 5062 |
Appearance | white or light yellow pellet |
Resin Base |
LDPE |
Melt index (190℃、2.16KG ) | 5~25 |
Dosage % (w/w) | 0.5~5 |
1) Improve surface quality including no precipitation ,no effect on transparency ,no effect on the surface and printing of film, lower Coefficient of friction,better surface smoothness;
2) Improve processing properties including better flow ability,faster throughput ;
Good anti-blocking & smoothness, lower Coefficient of friction, and better processing properties in PE,PP film;
Addition levels between 0.5~5.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended .
This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.
The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg . Original characteristics remain intact for 12 months from the production date if kept in recommend storage.
Marks: The information contained herein is offered in good faith and is believed to be accurate. However, because conditions and methods of use of our products are beyond our control, this information cannot be understood as a commitment of this product. The raw materials and its composition of this product will not be introduced here because patented technology is involved.
SILIKE silicone wax can be as a High-temperature Permanent slip additive solution for films, it is specially modified silicone polymer as the active ingredient, and it overcomes the key defects of general slip agents, including the continuous precipitation of the smooth agent from the surface of the film, the smooth performance decreasing with time going by, and the rise of temperature with unpleasant odors, etc.
$0
grades Silicone Masterbatch
grades Silicone Powder
grades Anti-scratch Masterbatch
grades Anti-abrasion Masterbatch
grades Si-TPV
grades Silicone Wax