• products-banner

Product

SILIKE Slip Anti-blocking additives for plastic Films

SILIMER 5235 is an alkyl modified silicone additive. It is used in super light plastic products such as PC, PBT, PET, PC/ABS, etc. It could Obviously improve the scratch-resistant and wear-resistant surface properties of products…


Product Detail

Product Tags

Sample service

Video

SILIKE Slip Anti-blocking additives for plastic Films,
Anti-blocking additives, Anti-blocking Masterbatch. Slip additive, Slip Anti-blocking additives,

Description

SILIMER 5235 is an alkyl modified silicone additive. It is used in super light plastic products such as PC, PBT, PET, PC/ABS, etc. It could Obviously improve the scratch-resistant and wear-resistant surface properties of products, keep the surface of products with long time lightness and texture, improve the lubricity and mold release of the material processing process so that the product property is better. At the same time, SILIMER 5235 has a special structure with good compatibility with the matrix resin, no precipitation, no effect on the appearance and surface treatment of products.

Product Specifications

Grade

SILIMER 5235

Appearance

White pellet

Concentration 100%

Resin  base

LDPE

Melt index (℃) 50~70
Volatiles % (105℃×2h) ≤ 0.5

Application advantages

1) Improve scratch resistance and wear resistance;

2) Reduce surface friction coefficient, improve surface smoothness;

3) Make products have good mold release and lubricity, improve processing efficiency.

Typical applications

Scratch-resistant, lubricated, mold release in super light without painting products such as PMMA, PC, PBT, PET, PA, PC/ABS, PC/ASA, etc; scratch-resistant, lubricated in thermoplastic elastomers such as TPE, TPU.

How to use

Addition levels between 0.3~1.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended.

Transportation & Storage

This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with temperature below 40 ° C to avoid agglomeration. The package must be well sealed after opening to prevent products from being affected by moisture.

Package & Shelf life

The standard packaging is a PE plastic drum with net weight of 25kg/drum. Original characteristics remain intact for 12 months from the date of production if kept with recommended storage method.Anti-blocking additives are used to reduce the tendency of plastic films to stick together when they are wound up on a roll. These additives are typically added to the plastic during the manufacturing process. Common anti-blocking additives include talc, calcium carbonate, silica, and polytetrafluoroethylene (PTFE).

SILIKE Slip Combine With Anti-blocking Masterbatch Used For BOPP, PE, CPP, PE, and other plastic Films
The product combines super slip and anti-blocking agents which designed for PE, CPP, PE, and other plastic Films.
It is particularly used for high-speed packaging and tobacco films that need a long-lasting hot slip, low haze, good anti-blocking, non-migration, and printable properties.


  • Previous:
  • Next:

  • FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES

    Sample type

    $0

    • 50+

      grades Silicone Masterbatch

    • 10+

      grades Silicone Powder

    • 10+

      grades Anti-scratch Masterbatch

    • 10+

      grades Anti-abrasion Masterbatch

    • 10+

      grades Si-TPV

    • 8+

      grades Silicone Wax

    Write your message here and send it to us