Product
Slip Silicone Masterbatch SF105H For BOPP/CPP Blown Films
Description
SF 105H is a homogeneous dispersion concentrate of ultra-high molecular weight polysiloxane in terpolymer copolymer PP. The carrier resin is a terpolymer copolymer polypropylene resin for heat sealing layer. The product has good dispersion. SF 105H is a smooth masterbatch that can be used for CPP and BOPP films. It can be directly added to the surface of the composite film to reduce the friction coefficient, play a good smooth effect and anti-adhesion effect, especially the smooth effect of high temperature and metal.
Product Specifications
|
Grade |
SF105H |
|
Appearance |
white or off-white pellet |
|
MI(230℃,2.16kg)(g/10min) |
7~20 |
|
Polymer carrier |
Terpolymer PP |
|
Slip sdditive |
UHMW polydimethylsiloxane (PDMS) |
|
PDMS content（%） |
50 |
| Apparent density（Kg/cm3） | 500~600 |
|
Volatile matter（%） |
≤0.2 |
Features
• Low COF
• Suitable for Metallization
• Low Haze
• Non-Migrating Slip
Processing Method
• Cast Film Extrusion
• Blown Film Extrusion
• BOPP
Benefits
1, SF 105H is used for high-speed packaging cigarette film that needs to have good hot and smooth performance on metal.
2, Adding SF 105H, friction coefficient with the temperature effect is small, high temperature hot smooth effect is good.
3, No precipitation in the processing process, will not produce white frost, extend the equipment cleaning cycle.
4, The maximum addition of SF 105H in the film is 5% (generally 0.5~5%), and the higher the addition amount will affect the transparency of the film. The greater the amount of addition, the thicker the film and the greater the influence of transparency.
5, If the film needs antistatic, can add antistatic masterbatch. If films need better anti-blocking properties and can be used with anti-blocking agents.
Application advantages
Surface performance: no precipitation, reduce the film surface friction coefficient, improve the surface smoothness;
Processing performance: with good processing lubricity, improve processing efficiency.
Typical application
For PP films which needs good slip and anti-blocking performances, reduces the surface friction coefficient, does not precipitate, and has a good improvement in processing performance.
Recommended Dosage
0.5 to 5% in the skin layers only and depending on the level of COF required. Detailed information available upon request.
Transportation & Storage
This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.
Package & Shelf life
The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg. Original characteristics remain intact for 24 months from the production date if kept in recommend storage.
FREE SILICONE ADDITIVES AND Si-TPV SAMPLES MORE THAN 100 GRADES
Sample type
$0
- 50+
grades Silicone Masterbatch
- 10+
grades Silicone Powder
- 10+
grades Anti-scratch Masterbatch
- 10+
grades Anti-abrasion Masterbatch
- 10+
grades Si-TPV
- 8+
grades Silicone Wax
