China Slip Silicone Masterbatch SF110 For BOPP/CPP Blown Films Manufacture and Factory

Slip Silicone Masterbatch SF110 For BOPP/CPP Blown Films

SF110 is an innovated smooth masterbatch specially developed and produced for BOPP/CPP film products. With specially modified poly dimethyl siloxane as the active ingredient, this product overcomes the key defects of general slip additives, including the slip agent continuous precipitation from the surface of the film, the smooth performance will decrease with time goes by and temperature increasing, odor, etc.

SF110 slip masterbatch is suitable for BOPP/CPP film blowing molding, casting molding, processing performance is the same as the base material, no need to change.

Process conditions: widely used in the production of BOPP/CPP blowing film, casting film and extrusion coating and so on.

Send email to us

Product Detail

Product Tags

Sample service

Video

Description

SF110 slip masterbatch is suitable for BOPP/CPP film blowing molding, casting molding, processing performance is the same as the base material, no need to change.

Process conditions: widely used in the production of BOPP/CPP blowing film, casting film and extrusion coating and so on.

Product Specifications

Grade	SF110
Appearance	white pellet
MI(230℃,2.16kg)(g/10min)	10~20
Surface density（Kg/cm³）	500~600
Carrier	PP
Volatile content（%）	≤0.2

Benefits

1. When SF110 film is added, the friction coefficient has little effect with temperature.

2. in the process of processing will not precipitate, will not produce white cream, prolong the cleaning cycle of equipment.

3. SF110 can provide low friction coefficient and has little influence on the transparency of the film.

4. The maximum addition amount of SF110 in the film is 10% (generally 5~10%).

5. If needs antistatic performance, could add antistatic masterbatch.

Application advantages

Surface performance: no precipitation, reduce the film surface friction coefficient, improve the surface smoothness;

Processing performance: good processing lubricity, improve processing efficiency.

Typical application

The slip and anti-blocking of PP film material is smooth, reduce the surface friction coefficient, does not precipitate, and has a good improvement on the processing property.

How to use

· SF110 slip masterbatch is used for BOPP/CPP film blowing molding and casting molding and the processing performance is same as the base material, no need to change.

· Dosage is generally 2~ 10%, and can make proper adjustments according to the product characteristics of raw materials and the thickness of the production films.

· During production, add the SF110 slip masterbatch directly to the substrate materials, mixed evenly and then added into the extruder.