SILIMER 5064MB2 is long chain containing polar functional groups alkyl-modified siloxane masterbatch. It is mainly used in PE system films, can significantly improve anti-blocking & smoothness of the film, and the lubrication during processing, can greatly reduce the film surface dynamic and static friction coefficient, make the film surface smoother. At the same time, SILIMER 5064MB2 has a special structure with good compatibility with the matrix resin, no precipitation, no effect on the transparency of film and food contactable.
Grade |
SILIMER 5064MB2 |
Appearance |
white or light-yellow pellet |
Resin base |
PE |
Melt index (℃) (190℃,2.16kg)(g/10min) |
0.5~5 |
Dosage%(W/W) |
0.5~6 |
1) Improve surface quality including no precipitation, not sticky, no effect on transparency, no effect on the surface and printing of film, lower coefficient of friction, better surface smoothness;
2) Improve processing properties including better flow ability, faster throughput;
3) Provide better anti-blocking and permanent slip properties.
Good anti-blocking & permanent slip properties, lower coefficient of friction, and better processing properties in PE film.
Addition levels between 0.5~6.0% are suggested. It can be used in classical melt blending process like Single /Twin screw extruders, injection molding and side feed. A physical blend with virgin polymer pellets is recommended.
This product could be transported as non-hazardous chemical. It is recommended to be stored in a dry and cool area with a storage temperature below 50 ° C to avoid agglomeration. The package must be well sealed after each use to prevent the product from being affected by moisture.
The standard packaging is a craft paper bag with PE inner bag with net weight of 25kg. Original characteristics remain intact for 24 months from the production date if kept in recommend storage.
$0
grades Silicone Masterbatch
grades Silicone Powder
grades Anti-scratch Masterbatch
grades Anti-abrasion Masterbatch
grades Si-TPV
grades Silicone Wax